Algas SDI Aquavaire


Horizontal Waterbath Vaporizer Models: Q1650H through Q15000H

  • Utility grade indirect fired horizontal LP-Gas vaporizer
  • Converts LP-Gas into superheated vapor at a balanced pressure
  • Designed for long term or intermittent use outdoors under extreme ambient
    conditions, and with little maintenance. Proven reliability to -40°F
  • Heavy duty Eclipse industrial burner requires no adjustments, even at high elevation
  • Built-in heavy ends separation chamber
    prevents clogging of regulators and other downstream devices
  • External water bath expansion tank reduces glycol boil off and reduces
    oxygen entrainment, which is the primary cause of corrosion
  • Walk-in style control room to protect from the elements
  • Push to prime feature for cold-start days
  • Optional Low NOx Burner Configuration


  •  Meets the design requirements of NFPA Pamphlet 58 for gas fired waterbath vaporizers.

  • All wiring, controls, electrical components, and their installation comply with recognized code standards defined in NFPA 58, NFPA 59, and NFPA 70.

  • Heat exchanger is fabricated and stamped in accordance withASMEPressure Vessel Code, Section VIII, Division 1.

  • LPG pressure vessel design rating: 250 psig at 650°F (17.6 kg/cm2 at 343°C ).

  • ASME or UL approved relief valve: 250 psig (17.6 kg/cm2).

  • Multi-header, multi-pass heat exchanger assures optimum velocity for complete vaporization and provides superheat to the vapor at rated capacity.

  • Minimum 15°F [ 8.4°C ] superheat @ 100% capacity.

  • Galvanized thermal expansion tank with water level sight gauge assures heat exchanger protection.

  • High quality forced draft power burner provides fast response to load changes.

  • Combustion efficiency of 80% minimum.

  • Electronic flame safeguard assures positive and safe ignition.

  • Two electrically operated main fuel shutoff valves in the gas train.

  • Float activated high LPG liquid level shutdown switch.



Algas Zimmer II

Zimmer II™ provides trouble-free LPG vapor — day-in and day out. And does it at a fraction of the cost of traditional methods. Utilizing an electrically heated aluminum heat exchanger, Zimmer II™ quickly and efficiently vaporizes the liquid LPG. The target market includes people and places where economic constraints previously limited their product options.

The benefits are clear:

  1. Dry electric design

  2. Self-regulating heaters match heat output to LPG usage

  3. No switches, thermostats, floats or relays to fail

  4. No maintenance required for 3 to 5 years!


  • Voltage options: 100-240VAC or DC
  •  Explosion-proof –Class I, Div 1, Grp D

Operational Overview

Zimmer II ™ uses an electrically heated aluminum heat exchanger to vaporize liquid LPG. The target market includes people and places where economic constraints previously limited their product options. Zimmer II ™ provides trouble-free LPG vapor — day-in and day out. And does it at a fraction of the cost of traditional methods.

Zimmer II ™ is remarkably small — the entire assembly weighs less than 15 kg. It can be installed in minutes and is simple and safe to use. The unit is the ideal solution for small commercial food vendors, modest commercial businesses and similar applications. Zimmer II ™ comes  equipped with a protective molded plastic cover. Minimal space requirements and flexible mounting configurations add to the appeal.

Entec Vaporizer



Model: ETV-30~1000

Capacity: 30~1000 Kg/hr

Method of heating: Electric heating hot water heating type

Design pressure: 1.8 MPa

Proof test pressure: 3 MPa

Airtight test pressure: 1.8 MPa

Design temperature: -25~ 80C

Working pressure: 0.1~ 1.56 MPa

Heater capacity: 5~ 150 KW

Voltage: 380V, 3 phase

Explosion proof


error: Alert: Content is protected !!