Horizontal Waterbath Vaporizer Models: Q1650H through Q15000H

  • Utility grade indirect fired horizontal LP-Gas vaporizer
  • Converts LP-Gas into superheated vapor at a balanced pressure
  • Designed for long term or intermittent use outdoors under extreme ambient
    conditions, and with little maintenance. Proven reliability to -40°F
  • Heavy duty Eclipse industrial burner requires no adjustments, even at high elevation
  • Built-in heavy ends separation chamber
    prevents clogging of regulators and other downstream devices
  • External water bath expansion tank reduces glycol boil off and reduces
    oxygen entrainment, which is the primary cause of corrosion
  • Walk-in style control room to protect from the elements
  • Push to prime feature for cold-start days
  • Optional Low NOx Burner Configuration


  •  Meets the design requirements of NFPA Pamphlet 58 for gas fired waterbath vaporizers.

  • All wiring, controls, electrical components, and their installation comply with recognized code standards defined in NFPA 58, NFPA 59, and NFPA 70.

  • Heat exchanger is fabricated and stamped in accordance withASMEPressure Vessel Code, Section VIII, Division 1.

  • LPG pressure vessel design rating: 250 psig at 650°F (17.6 kg/cm2 at 343°C ).

  • ASME or UL approved relief valve: 250 psig (17.6 kg/cm2).

  • Multi-header, multi-pass heat exchanger assures optimum velocity for complete vaporization and provides superheat to the vapor at rated capacity.

  • Minimum 15°F [ 8.4°C ] superheat @ 100% capacity.

  • Galvanized thermal expansion tank with water level sight gauge assures heat exchanger protection.

  • High quality forced draft power burner provides fast response to load changes.

  • Combustion efficiency of 80% minimum.

  • Electronic flame safeguard assures positive and safe ignition.

  • Two electrically operated main fuel shutoff valves in the gas train.

  • Float activated high LPG liquid level shutdown switch.



error: Alert: Content is protected !!